"Global Softness" is enabled by default. In this case the check box appears ticked. Apart from overall "Softness", all other Softness controls underneath are disabled.
The control range is from 0.00% to 100.00%. In order to adjust the designated Crop value, the according slider, the numeric entry box or the arrow up/down icons can be used. [ float, min: 0, max: 1 ]
The control range is from 0.00% to 100.00%. In order to adjust the designated Crop value, the according slider, the numeric entry box or the arrow up/down icons can be used. [ float, min: 0, max: 1 ]
With the slider "Rounded corners" the radius on the Top-Left, Top-Right, Bottom- Left and Bottom-Right corner of a selected Layer source can be adjusted, once "Crop" for this Layer is enabled. The control range is from 0.00% to 100.00%, default = 0.00%. [ float, min: 0, max: 1 ]
Softness will be applied for all edges equally. The control range is from 0.00% to 100.00%. To adjust the "Softness" value, the according slider, the numeric entry box or the arrow up/down icons can be used. [ float, min: 0, max: 1 ]
ReadonlysoftnessThe control range is from 0.00% to 100.00%. In order to adjust the designated Softness value, the according slider, the numeric entry box or the arrow up/down icons can be used. [ float, read_only, min: 0, max: 1 ]
ReadonlysoftnessThe control range is from 0.00% to 100.00%. In order to adjust the designated Softness value, the according slider, the numeric entry box or the arrow up/down icons can be used. [ float, read_only, min: 0, max: 1 ]
ReadonlysoftnessThe control range is from 0.00% to 100.00%. In order to adjust the designated Softness value, the according slider, the numeric entry box or the arrow up/down icons can be used. [ float, read_only, min: 0, max: 1 ]
ReadonlysoftnessThe control range is from 0.00% to 100.00%. In order to adjust the designated Softness value, the according slider, the numeric entry box or the arrow up/down icons can be used. [ float, read_only, min: 0, max: 1 ]
The control range is from 0.00% to 100.00%. In order to adjust the designated Crop value, the according slider, the numeric entry box or the arrow up/down icons can be used. [ float, min: 0, max: 1 ]
The control range is from 0.00% to 100.00%. In order to adjust the designated Crop value, the according slider, the numeric entry box or the arrow up/down icons can be used. [ float, min: 0, max: 1 ]